How To Take Apart A Smok Stick V8

This article takes a closer look at how to take apart a Smok Stick V8 and determines which features you might need to get it back up and running. Follow this guide to make sure you’re able to do basic maintenance or repair work on your vape!

Introduction

If you’re looking to learn how to take apart a Smok Stick V8, then this guide is for you. In this article, we’ll walk you through the steps needed to dismantle the device and identify its parts. We will also provide a guide on how to rebuild it should something go wrong. So if you’re a beginner looking to fix or mod your devices, then this is the guide for you.

Procedures

If you’re looking to take apart your Smok Stick V8 mod, here are the procedures you need to follow. First, remove the battery cap and unscrew both ends of the battery. Next, remove the top cover of the mod by gently pushing down on one side and pulling up on the other. You’ll now see the internal components. Disconnect the wires from each component and slide them out of the way. Finally, put everything back together in reverse order.

Disassembly

If you’re looking to take apart a Smok Stick V8 unit, there are a few things that you’ll need before getting started. You’ll need a Phillips screwdriver, an Allen key set, and a Torx wrench. Once you have those items, it’s time to get started!

To start off, slide the battery out of the device. Make sure to disconnect the cable first – it’s a little difficult to manage if you don’t. Once the battery is out, unscrew the two screws that hold on the top panel. This will give you access to the atomizer and battery. Next, remove the atomizer by unscrewing it from its connector. Be careful not to lose any of the screws! Finally, take out the battery by unscrewing it from its holder.

See also  How To Put Vape Juice In A Vape

Conclusion

In this article, we will be concluding our Smok Stick V8 disassembly guide. We started by taking off the bottom cap and unscrewing the battery. Next, we removed the 2 screws that held the metal panel in place and it came off easily. Once that was done, we could see the battery inside. The same thing happened with the coil heads – one unscrewed, while the other had a push button to help remove it. Once everything was out, we could start cleaning it up. Unfortunately, there wasn’t too much to clean because of how dirty it was when we received it. All in all, this is a very easy mod to do and provides great performance for your device.

Frequenty Asked Questions

I Thought The Smok Stick V8 Was A Vape Pen.

The Smok Stick V8 is more than just a vape pen and is more like a personal vaporizer. A vape pen only has one whole chamber, whereas the Smok Stick V8 has three functional parts: the tank, the battery and the mouthpiece.

The Smok Stick V8 does vape, and that’s what we’re primarily focused on, but it is also a mod. A vape pen is usually just a basic device and you can use it without needing to know how to take apart the mod. The Smok Stick V8 has an electronic circuit board inside of it so there are different parts that need to be taken apart for vaping or for adding your own coils/wicks.

How Long Does It Take To Replace A Smok Stick V8?

We are not the most knowledgeable company in the world when it comes to Smok devices so we cannot offer an exact time on how long replacing a V8 will take. Luckily, you can always contact our customer service line and they’ll be able to assist you with the process. Unfortunately though we don’t have any opening hours as it is unfortunately just not that simple when working with these types of devices.

See also  How To Charge A Cartisan Pen

Our Smok Stick V8 will last between 3-5 days, we’re more than confident that you’ll love it.

How Do I Take Apart A Smok Stick V8?

You must be very careful when trying to take apart a Smok Stick V8. If you are not careful, there is a chance of harming the battery and your Smok Stick V8. You can open the top lid by pressing on the screen. Then remove the screws on each side which secure the battery to the chassis. Then unscrew those two screws which secure that last screw securing all three sides together. After you have unscrewed this last screw, use that same screwdriver and now unscrew these two small screws at the bottom, then carefully lift out the battery.

1.Use a flathead screwdriver to remove the four middle screws on the bottom of the battery cover/bay. 2.Press your finger into the groove along the side of the battery bay/cover and use your thumb and index fingers to simultaneously lift up and open it (do this gently).

I Want To Take Apart My Smok Stick V8

It’s not a complicated process. The Smok Stick V8 is an easy piece to take apart. All you need to do is remove 5 screws, a battery door, and then put the coil unit in a water-based cleaning solution to dissolve any spilled liquid inside of the coil.

We are happy to help you take apart your Smok Stick V8. You can use one of these in-app links.

How Do I Take Apart My Treasure

Simply unscrew the bottom of your device from the top and then peel back the sticker on the bottom.

See also  How To Clean Cleito Tank

We have a video to walk you through a process of taking apart your treasure. Watch the video we have created to help you take apart your treasure.

I Can’t Take Apart My Smok Stick V8. What Steps Should I Take?

If you can’t take it apart and don’t know what you are doing, please contact the seller. You can also contact our support team, if you need a step-by-step instructional video on how to disassemble your Smok Stick V8.

If you’re using a person with manual dexterity for help, you’ll first want to call the Smok customer service number if your problem is not covered in our FAQs. In the case of fire and electrical hazards, leave the device on and make contact with the fire department before continuing. You will notice that some parts have already been removed so this is an easy step-by-step guide to help you fix your device.

Also Check:

Leave a Comment