Want to know how to remove the coil from a Geekvape Aegis? Don’t worry, as it’s very easy!
What is the System of a Geekvape Aegis?
The Geekvape Aegis system is a smart juice delivery system that uses coils. A coil is a device that delivers nicotine, flavor, and vapor from your e-Liquid to your atomizer. The Geekvape Aegis system is made up of 3 parts: the Base Unit, the Tank, and the Coils. To use the Geekvape Aegis system, you first have to install the Base Unit. This is a small, square device that sits on top of your tank. It holds the coils and allows you to fill your tank with e-Liquid. Next, you have to install the Tank. This is a cylindrical device that sits on top of the Base Unit. The Tank holds your e-Liquid and provides ventilation for it. Finally, you need to install the Coils. These are small devices that sit on top of the Tank. They deliver nicotine, flavor, and vapor from your e-Liquid to your atomizer.
Why did I break my coil?
If you’re experiencing problems with your Geekvape Aegis coil, there are a few things that you can do to try and fix it. First, check to see if the power is still being delivered to the coil. If the power is off, then you may need to replace the battery. Second, make sure that there isn’t anything blocking the air flow around the coil. If there is something blocking the air flow, then the heat from the atomizer will not be able to reach the coil and it will break. Finally, be sure to clean and dry the contacts on the battery and coil before re-using them.
That doesn’t show up anywhere!
If you’re having problems removing the coil from your Geekvape Aegis, you may be wondering where it doesn’t show up on the device’s battery dismantle guide. Unfortunately, there doesn’t seem to be a definitive answer as to where the coil goes. Some people say it can go in the fire button area while others say it should go in the clearomizer area. Ultimately, it’s up to you to decide where to put it. All you need is some tweezers and a small Phillips screwdriver.
If you’re struggling to find your coil, here’s how…
If you’re having difficulty locating your Geekvape Aegis coil, here’s how to do it: Start by taking the mod apart. There are two screws on the front and two screws on the back. Once they’re out, tilt the mod so the batteries fall out. It might help to gently wiggle it around while working to unscrew everything. Once everything is off, it should be fairly easy to find your coil since it will be encased in silicone. Simply break the seal and remove the coil. Make sure to clean everything up before putting the mod back together!
If your head broke off
If you have a Geekvape Aegis and your head broke off, there are a few things that you can do. If the coil is still attached to the atomizer, you can remove it by unscrewing the two screws at the top of the atomizer. If the coil is no longer attached, you can try to remove it by pulling on it from the top or side. If that doesn’t work, you can try to remove it by breaking it off.
Frequenty Asked Questions
How Do I Remove The Coil From My Geekvape Aegis?
If the coil is positioned properly, it should be easy to remove. If you want to damage the device further please seek professional repair assistance.
You do not need to follow the directions that are on the Geekvape site for removal of your coil. All you need is a regular screwdriver.
Is There A Video On Taking The Coil Out Of Vape?
What kind of YouTube video is this?
What Should I Do With The Coil Of My Vapetasia Aegis?
Yes, there is a video for this question on our site.
Nope, but you can watch this video if it helps: https://www.youtube.com/watch?v=6U50-MjKmIY
What Vape Is This For?
Please check the instruction manual for your vape for specific instructions on how to remove the coil and prepare it to be reused. If the manual is not available or you are unsure, please refer to our blog section.
If your coil is a GT-N eCab 2, you can use it to make a DIY coils with other parts of your Vapetasia Aegis. If not, it’s time for a new coil!
I Have A Geekvape Aegis And The Coil Is Stuck In My Device, What Should I Do?
This is for the Geekvape Aegis.
We’re sorry to say, as of right now we do not sell the GeekVape Aegis. The coil is compatible with the Griffin RTA which you can use to replace your Pico sub ohm Tank. You can buy your own replacement coils at https://www.tresorit.com/collections/vapes-supplies