How To Fix Dab Pen Wires Broke

With accessible components that are easy to replace, dab pen wires primarily consists of silica and lead-free solder hybrids. If the build of your vape pen has broken down due to excessive heat, it’s also easy to fix as a whole.

The Purpose of a Dab Pen

Dab pens are one of the most popular smoking devices on the market today. They are small, portable, and easy to use. However, dab pens can also be fragile and prone to breaking. If your dab pen wires break, you can fix them using a few simple steps.

The first step is to remove the broken wire. You can do this by grabbing the wire near the end that is broken and pulling it out of the pen body. Be careful not to pull on the remaining wire inside of the pen body.

Once the broken wire is removed, you can start to repair it using a pair of pliers. grasp one end of the wire and put the pliers around it. Next, squeeze the pliers together until they’re tight enough to grip the wire but not so tight that they cut into it. Twist the wire around until it’s properly repaired. Make sure that the end of the wire that you’ve replaced is secure in the pen body by putting a drop of superglue on it and Press it down.

Now you’re ready to reattach your dab pen wires to your device. Insert one end of the repaired wire into the hole closest to where your battery sits, then push down on both ends until they fit snugly against each other. Finally, insert the other end of the wire into where you originally inserted it and push down until it fits snugly against that end as well.

See also  How To Unclog A Vape Pod

Tips for Keeping Your Dab Pen Working

Your dab pen can be a handy tool for smoking, but if the wires get broken, it can become practically unusable. Here are some tips to keep your dab pen working smoothly:

– Make sure the battery is fully charged. When the battery is fully charged, the pen will last longer and work more efficiently.
– Avoid letting the pen fall from high places. If the pen falls from high places, it can be damaged beyond repair.
– Keep the pen clean and free of debris. If debris got stuck in between the wires, it can cause them to break. Clean the pen regularly to maintain its functionality.

How to Fix Broken Dab Pen Wires

If you have a broken dab pen wire, there are a few things you can do to fix it. The most common issue is that the microswitch inside the wire breaks, which causes the pen to stop working. There are three potential solutions:

a) Replace the microswitch: This is the easiest and most common solution. You can buy replacement microswitches online or at your local vape shop.

b) Fix the connector: If the microswitch is not the issue, you may need to fix the connector. This will involve either replacing the wire or adding a new connector.

c) Repair the wire: If both the connector and microswitch are broken, you may be able to repair the wire by filing down the broken area and re-soldering it.


If you have been struggling with broken or leaky dabb pens, this Fix-It guide will help. You will learn how to fix dab pens with broken wires, and stop the leaks. Fixing broken wires in a dab pen is a relatively easy process, and it can be done by either fixing the wire with a soldering iron or using a wire stripper. If you opt to use a soldering iron, you will need to make sure that the heat is not too hot, as it could cause the wire to combust. Once you have fixed the wire, make sure to clean the area around the breakageag and reattach the clip before using your dabb pen again.

See also  How To Take Apart A Smok Stick V8

Frequenty Asked Questions

My Dab Pen Stopped Working, What Should I Do?

If your dab pen’s wires have broken, you should take it to a vape shop and have them fix it. Be sure to include your dab pen’s serial number, as that will help the shop associate the issue with the product.

If you have a vape pen with wire, it’s likely that the wire has broken. Sometimes the wire can just break off, other times the wires might be faulty and need to be replaced. In either case, there are a few simple steps that you can take to troubleshoot and fix your pen.

I Broke My Dab Pen, Can You Help Me Fix It?

Unfortunately, we cannot repair broken dab pens. However, we can provide information on how to fix them. Follow the instructions below and you’ll be able to save your pen for another day.

Unfortunately we cannot help you fix your dab pen. We only offer products that can be bought and used.

How Do I Fix My Dab Pen Wires That Have Broken?

If you have a broken dab pen wire, the best way to fix it is to replace it. You can buy a new dab pen wire online or at your local dispensary.

You can fix your dab pen wires by wrapping them around the base of the pen several times. This will keep the wires from breaking again.

I Broke My Dab Pen And Now It Won’t Work.

This is a common issue that dab pen users face. Broken wires inside the pen can prevent it from working and make it difficult to take dabs. In this article, we will show you how to fix your broken dab pen wires.

See also  How To Use Vape Juice

We understand how frustrating it can be when something goes wrong and your dab pen won’t work. Don’t worry, we have a quick and easy solution.

I Have A Dab Pen And My Wires Broke. Will This Fix My Pen?

Yes, our dab pen wire fix kit will help you fix your wires and keep your dab pen working properly. The kit includes a new set of wires and a simple instruction guide. When you receive your kit, simply remove the old wires from your pen, replace them with the new wires, and read the instruction guide for a step-by-step guide on how to use the kit.

Yes, our products are designed to be easy to use and fix. Simply unscrew the pen housing and replace the wire.

My Dab Pen Broke And I Don’t Know How To Fix It.

We have a few articles that might help you out. The first article will show you how to replace the entire pen. The second article will show you how to fix a broken wire.

We definitely have the solution for you. Our step-by-step guide will show you how to fix your broken dab pen wire in no time.

Also Check:

Leave a Comment