How To Fix A Burnt Coil In A Vape

If you have a burnt coil in your vape pen, chances are that all is not lost. If the burnt spark isn’t too bad and the beeswax you stored in the tube when you bought it works wonders, then you should still be able to rebrew your coils over time by removing the undesired material and replacing it with a new cotton. Keep reading to learn more!

How to tell if your coil is burnt

If you vape and notice that your vape coil is burnt, there are a few things you can do to fix the situation. The first thing to do is to check to see if the coil is properly installed. If it is not, the coil will most likely be burnt. Secondly, if the coil is installed properly, check to see if there is any debris on or around the coil. If there is, remove it using a vacuum cleaner or a brush. Lastly, if all of these steps fail, then the coil may be burnt and must be replaced.

What can happen if a coil is left unburnt

If a coil is left unburnt, it can result in the coil becoming burnt and needing to be replaced. This will also decrease the life of the battery and may even cause it to malfunction. If you notice that a coil is burnt, do not ignore it – take action right away to prevent further damage.

How to fix a burnt coil

If you’ve got a burnt coil on your vaping device, there are a few things that you can do to try and fix it. Depending on the severity of the burnt coil, you may be able to just replace the coil – though this is less likely in cases where there’s significant damage done to the coil. If replacing the coil is not an option or if the burnt coil is just a minor inconvenience, then one of two other methods may work: re-wicking or re-coiling.

Re-wicking is a more drastic solution and will usually require that the entire device be replaced. Instead of using cotton wicking, you will use special silicone wick plugs that are designed to reach deep within the coils and re-wick them. Re-coiling is a more common solution and is usually just a case of adjusting the coils so that they’re drawing more efficient juice from the atomizer.

See also  How To Refill A Vape With Juice

How to avoid a burnt coil as much as possible

There are a few ways to avoid burnt coils in your vaping experience.

The most important thing is to be aware of how much wattage you’re using and how long you’re smoking for. If you’re using an E-cigarette that’s built for high wattage, try to stay below 40 watts. If you’re using an E-cigarette that’s not built for high wattage, try to stay below 20 watts.

If you’re using a variable wattage E-cigarette, make sure that the voltage is set at the middle or lower setting. Increasing the voltage will heat up your coil more, which can lead to a burnt coil.

Another way to avoid a burnt coil is to use fresh e-juice every time you vape. If you don’t vape for a while, put your device into “Vaping Standby” mode so it will start up with less power when you re-enter the world of nicotine.

Finally, make sure that your battery is properly installed and charged before you start vaping. A low battery can lead to a fried coil.


If your vaping experience seems to be hit-and-miss, you might be experiencing a burnt coil. This guide will tell you how to fix a burnt coil in a vape, so you can get back to enjoying smooth, flavorful hits.

Before we get started, it’s important to know that not all coils are affected by burning. If the burnt taste is only noticeable when using low resistance coils (below 1.0ohm), then it’s likely that the coil is not actually burnt – but rather clogged with cotton material. In cases like this, cleaning the coil may resolve the issue, but if the burnt taste persists even after cleaning, then the coil may need replacing.

If your coils are actually burnt, there’re a few things you can do to repair them:

1) Check e-liquid levels and make sure they’re properly filled into the atomizer tank. We recommend using an ohm reader or digital volts meter to make sure you’re reaching consistent wattage levels while vaping. Overfilling can lead to clogged coils and burning flavors.

2) Clean the inside of your atomizer tank and wick system regularly using Deezer or cotton swabs soaked in rubbing alcohol. Make sure to completely clean all of the parts before reassembling your device.

See also  How To Fix Wax Pen

3) Use a higher wattage setting when vaping; this will help heat up the coil more quickly and avoid burning flavours. Be aware that too much heat can also

Frequenty Asked Questions

Can I Use Your Images For Commercial Purposes?

Yes, you can use our images for commercial purposes with the proper licensing agreement. You can find more information on our licenses page.

Yes, you are free to use our images for commercial purposes as long as you follow our Creative Commons license. You can find the license at the bottom of every image.

I Have A Vape That’s Been Giving Me Problems. What Can I Do To Fix It?

The most common problem with vape coils is that they get burnt. This happens when the wick isn’t saturated with nicotine and used regularly. The solution to this is to replace the burnt coil with a new one. You can also try cleaning it and adjusting the firmware.

There are a few things that you can do to try and fix your vape. First, make sure that the battery is charged and that it is properly installed. Next, check to see if there is a burnt coil. If there is, you can replace the coil. Finally, try some of our customer service tips to get your vape working again.

I Think I Burnt My Coil In My Vape. What Can I Do?

If you think your coil has burned, the best thing to do is stop using the vape and remove it. If that isn’t possible or if you don’t have time to remove it, try the following:

The first thing you should do is remove the battery and unscrew the tank. Take a look at the coil and see if there is any burnt material on it. If so, you will need to replace the coil.

I’ve Had My Vape For A While And Now I’m Seeing Burnt Coils. What Do I Do?

If you are seeing burnt coils, there is a high chance that the coil is burnt. This can be caused by too much voltage, using the wrong ohm rating for your coil, or using an atomizer that is too strong. If you are experiencing these issues, please try the following:

See also  How To Turn On Backwoods Battery

If your vape is showing burnt coils, there is a high chance that you have a defective coil. There are a few things that you can do to try and fix the problem. The first thing to do is to try a new coil. If that doesn’t work, then you can try to fix the coil by following these instructions.

I’ve Got A Vape That’s Not Firing, What Should I Do?

If your vape isn’t firing, there’s a high probability that the coil is burnt. The best way to test if the coil is burnt is to take it apart and see if there are any burnt pieces. If you’re unable to replace the coil, you can try soaking it in hot water for a few minutes.

If your vape is not firing, there are a few things you can try. Make sure that the battery is fully charged and that the coil is clean and in good condition. If the coil is clean, replace it with a new one. If the battery is charged and the coil is clean, check to see if there is any obstructions between the battery and coil. If there are no obstructions and the battery is fully charged, your next step should be to try a new cartridge.

I’m Having Trouble With My Vape, Can You Help?

Unfortunately we cannot help with specific troubleshooting steps, but we can direct you to some resources that might be of help. If you have a model number or serial number for your device, we can try to find support for that specific device online. Additionally, if you’ve already attempted to troubleshoot the issue and haven’t been successful, our team might be able to offer further assistance.

We’re sorry to hear that and would be more than happy to help. Unfortunately, we cannot offer individual help for troubleshooting vape issues. However, if you’re looking for general vaping information, our comprehensive guide might be of help.

Also Check:

Leave a Comment