How To Clean Walther Ppq

Cleaning walther, like any product, can be an all-consuming task. You must do your best to avoid damaging your gun and expensive accessories, but at the same time keep the gun from becoming rusty – a task that can be difficult with large cleaning equipment. Today’s technology might just provide the solution for this dilemma – check out

What is the Walther Ppq?

The Walther PPQ is a popular carry pistol that falls under the “compact” category. It is chambered for 9mm Luger, has a 17-round magazine, and measures 6.25 inches long. It weighs 23 ounces unloaded, and has a 3-inch barrel.

Many users of the Walther PPQ report good satisfaction with its accuracy and handling, while others find it too small or lightweight for their preferences. Regardless of user opinion,ics suggest that it would make an ideal concealed carry handgun.

How to Disassemble and Assemble the Walther Ppq

In this blog article, we will show you how to disassemble and assemble the Walther Ppq. This pistol has been a staple for law enforcement and military use for many years, so it is important to keep it Clean and functioning.

To start off, place the pistol on a flat surface. Make sure that the trigger is not cocked.

Now grip the slide just below the rails with your left hand and pull upwards while holding onto the rear end of the slide with your right hand. The slide should now spring forward, dislodging the barrel assembly from its housing.

Now take a look at the disassembly procedure for each component:
-The Magazine Release Button: This button located on the left side of the magazine well can be pressed inwards to release the magazine if it is inserted in backwards. Pressing down on this button causes it to move downwards, towards the rear of the gun.
-The Hammer: The hammer is held in place by a lever situated above the firing pin. To Unlock and Discharge The Hammer, depress this lever located just behind and below the hammer. Be careful not to hit your thumb on this lever when firing as it can cause serious injury!
-The Firing Pin Block: This block sits just in front of and below the hammer and blocks movement of both until they are engaged together by springs. To chamber a round, depress this block using your thumb while pulling back on the trigger

See also  How To Clean Shower Head To Prevent Legionnaires Disease

Cleaning the Walther Ppq

Cleaning the Walther Ppq can be a daunting task, but with a little know-how and some basic supplies, it’s not too difficult. Before starting, take note of which areas of the gun need to be cleaned and focus on those first. Next, gather your supplies and start by cleaning the exterior of the weapon with a mild soap and water solution. Be sure to rinse off the firearm thoroughly afterward. For tougher dirt and debris, use a commercially available firearm cleaner. Finally, wipe down all metal surfaces with a light grade of oil.


If you have a Walther Ppq pistol, it’s time to take care of it. Cleaning it is essential to preserving its functionality and keeping it looking great. Here are four easy steps to help you clean your Walther Ppq pistol:

1. Remove the magazine and ensure that the weapon is unloaded.
2. Wet a cloth with mild soap and wring out the excess water.
3. Wipe down the gun’s grip and chrome-plated parts with equal portions of the wet cloth.
4. Rinse off the gun with water and dry it off with a cloth.

Frequenty Asked Questions

Where Can I Find More Information About How To Clean Walther Ppq?

You can find more information about How to Clean Walther Ppq on our website, blog or social media pages. You can also call us at any time if you have any additional questions.

Our product page has all the information you need. You can also read our blog post for more tips on how to clean your Walther Ppq.

See also  How To Clean Yocan Evolve Plus

I Just Bought A Walther Ppq And It Doesn’t Seem To Be Holding Any Of My Rounds Properly. What Can I Do To Clean It Properly?

Our guide will show you how to clean the Walther Ppq properly to keep it in good condition. We recommend that you disassemble the gun completely and clean all of the moving parts with a clean cloth or gun wipe. Don’t forget to lubricate all of the moving parts!

The Ppq is a complicated pistol to clean. Here are a few tips:

Can I Get A Copy Of Your Guide To Cleaning My Walther Ppq?

Unfortunately, at this time we do not offer a guide to cleaning your Walther Ppq. We apologize for any inconvenience this may have caused.

Unfortunately, we do not provide copies of our guides. We believe that by teaching people how to clean their own firearms, they will be more knowledgeable and able to take better care of them.

Also Check:

Leave a Comment