How To Clean Ls2 Rapid Helmet

Have you ever been frustrated with how dirty your helmet has gotten over the course of a season? The Ls2 Rapid is probably the most reliable and affordable helmet you can buy, but it can still get quite dirty with time. Luckily, these steps will teach you how to best clean an LS2 rapid helmet.

How to Clean Your Helmet

If you’re looking for a thorough cleaning of your LS2 Rapid helmet, here are the steps you’ll need to take. For best results, follow these instructions once per week.

First, remove all removable parts from your helmet. This includes the visor, lining, and any other attachments. Next, using a mild soap and a soft cloth, wipe down the inside and outside of your helmet. Rinse with clean water and dry with a soft towel.

Once the helmet is dry, apply a small amount of armor-all or similar product to a clean cloth and wipe down the entire surface of the helmet. This will help to keep the helmet looking new and will protect it from UV damage.

Attach all removable parts back onto the helmet and you’re finished! A clean LS2 Rapid helmet will help keep you safe on the road.

How to Remove Stains

LS2 Rapid helmets are made with a quick-release system that allows for easy and convenient helmet removal. But over time, this system can become gunked up with dirt, hair, and other debris, making it difficult to remove the helmet when you need to. Here’s how to clean and maintain your LS2 Rapid helmet so that it removes easily every time.

First, start by removing the outer shell of the helmet. You can do this by depressing the two release buttons on either side of the helmet and pulling the shell off. If the helmet is particularly dirty, you may want to clean the shell separately from the rest of the helmet.

See also  How To Clean Cork Yoga Mat

Once the shell is off, remove the cheek pads and liner. These can be washed in warm water with mild soap. Be sure to rinse them thoroughly before letting them air dry.

Next, clean the inside of the helmet with a damp cloth. If there are any stubborn stains, you can use a mild cleaner or rubbing alcohol on a cotton swab to remove them. Once the inside of the helmet is clean, replace the cheek pads and liner.

Now that the inside of the helmet is clean, you can focus on cleaning the quick-release system. Start by removing any dirt or debris that may be caught in the mechanism. You can use a soft brush or cotton swab to remove anything that’s stuck.

Once the mechanism is clear, lubricate it with a silicone-based lubricant.

Methods of Cleaning a Helmet

There are a few different methods that can be used to clean an LS2 Rapid Helmet. The first is to use a mild soap and water solution. Simply mix a small amount of soap with some lukewarm water, and then use a soft cloth to scrub the helmet. Rinse the helmet off with clean water afterwards.

Another method is to use a vinegar and water solution. Again, mix a small amount of vinegar with some lukewarm water, and then use a soft cloth to scrub the helmet. Rinse the helmet off with clean water afterwards.

If your helmet has stubborn dirt or grime on it, you can try using a mild abrasive cleaner. Be sure to read the labels carefully and follow the instructions, as some cleaners can damage the finish on your helmet. Rinse the helmet off with clean water afterwards.

See also  How To Clean A Saucer Chair

Finally, you can polish your helmet with a quality motorcycle polish. This will help to restore the shine and protect the finish of your helmet.

Conclusion

When it comes to cleaning your LS2 helmet, there are a few different methods you can use. The most important thing is to use gentle cleaners and avoid harsh chemicals. You should also avoid using any abrasive materials, as they can damage the helmet’s finish.

To clean the outside of your helmet, start by wiping it down with a damp cloth. If there are any stubborn dirt or grime marks, you can gently scrub them with a soft bristled brush. Once you’ve removed all the dirt and grime, rinse the helmet off with clean water and dry it with a soft cloth.

To clean the inside of your helmet, start by removing the liner and padding. These can usually be machine washed on a delicate cycle, but always check the care label first. Once the liner and padding are clean, you can wipe down the inside of the shell with a damp cloth. If there are any tough stains, you can gently scrub them with a soft bristled brush. Once you’ve removed all the dirt and grime, rinse the helmet off with clean water and dry it with a soft cloth.

Frequenty Asked Questions

How Often Do I Need To Clean My Helmet?

Every time you ride, take a quick look at your helmet. If it is covered in dirt, bugs, or anything else, give it a good cleaning. A simple wipe down with a clean cloth should do the trick. If your helmet is really dirty, you can use mild soap and water. Be sure to rinse thoroughly and dry completely before your next ride.

See also  How To Clean Cad Cell On Oil Burner

Depending on how often you use your helmet, we recommend cleaning it every few months. However, if you notice that the helmet is starting to look dirty sooner than that, then you can clean it more frequently.

How Often Should I Clean My Helmet?

We recommend that you clean your helmet every time you use it. This will help to remove any dirt or debris that could potentially damage the helmet.

We recommend that you clean your helmet at least once a month. However, if you live in a dusty or dirty environment, you may want to clean your helmet more often.

How Do I Clean My Helmet?

Cleaning your helmet is easy, just follow these simple steps:

Use a mild soap and a soft cloth. Rinse the helmet thoroughly with clean water. Do not use any solvents, abrasives, or other harsh chemicals.

How To Clean Ls2 Rapid Helmet?

The best way to clean your LS2 Rapid helmet is with a mild soap and water solution. Use a soft cloth to wipe down the interior and exterior of the helmet, taking care not to scratch the surface. Rinse the helmet thoroughly with clean water and dry it with a soft towel. You can also use a mild cleaner specifically designed for cleaning motorcycle helmets.

How To Clean Ls2 Rapid Helmet is a question that our customers ask us all the time. We have put together a video tutorial that will show you step by step how to clean your helmet.

Also Check:

Leave a Comment