This article is about how to clean an igniter on a furnace. This is an important task to do if your furnace is not working properly. By cleaning the igniter, you will hopefully fix the problem and your furnace will work again.
What is the Igniter?
The igniter is the small, often cylindrical body on the end of a gas valve that opens to allow gas to flow into the furnace. Dirt, dust, and other objects can build up on the igniter, keeping it from operating properly. Cleaning the igniter can help ensure proper combustion and maximize energy efficiency in your furnace.
How to Clean the Igniter
If you have a furnace that uses a gas ignition system, it’s important to clean the igniter regularly. Cleaning the igniter will prevent problems with the furnace, such as poor performance or a lack of heat.
To clean the igniter, remove it from the furnace and place it on a flat surface. Remove any debris or soot that may be clinging to it. Use a wire brush to clean the igniter’s metal surfaces. Be careful not to scratch the surface. Finally, use a dry cloth to wipe off any residual oil or dust.
Conclusion
If you have a gas furnace, there’s a good chance the igniter is dirty. Igniters are small electric motors that start the burn process in gas furnaces. Over time, dirt and dust can accumulate on the igniter, making it difficult to start the furnace. In some cases, the igniter will even fail completely.
Here are four tips on how to clean an igniter:
1. Remove the igniter from the furnace
This is usually easiest if you have a flat-head screwdriver sized appropriately for the job. Gently pry up on one side of the igniter until it comes free. Be careful not to damage the motor or any wires inside.
2. Sweep off the debris
Once the igniter is free, use a broom or duster to sweep off any loose debris. Be sure to get into all of the nooks and crannies. If there’s stubborn debris, use a vacuum cleaner or shop vacuum to remove it.
3. Wipe down with a cloth and dry off
Now that the debris is cleaned off, use a cloth to wipe down the surface. Make sure to get into all of the crevices and corners. Finally, use a hair dryer on low heat to finish drying off the igniter.
4. Reinstall in furnace and test
Frequenty Asked Questions
I Have An Igniter On My Furnace And I Don’t Know How To Clean It.
Follow these simple steps to clean your igniter:
The igniter is a metal tube that starts the furnace fire. The fire can easily get out of control and start a dangerous explosion if not cleaned properly. Follow these simple steps to clean the igniter:
I Have A Furnace That Doesn’t Work, Can You Help Me Fix It?
Unfortunately, we cannot help with furnace repairs.
Unfortunately we do not offer furnace repair services. We are a website that compares prices of different products and services.
I Have A Fireplace That Doesn’t Work And I Need To Clean The Igniter. Where Can I Find A Cleaning Kit?
You can find a cleaning kit for your fireplace on our website. You can also call us toll-free at 1-800-926-8378 and we will be happy to assist you with ordering the cleaning kit.
The best place to find a cleaning kit for your fireplace is probably at a hardware store. Hardware stores usually carry a wide range of cleaning products, as well as tools to clean the igniter.