How To Clean Bionaire Tower Fan

Just as a fan keeps you cool during the hot summer day, Bionaire Tower Fan offers cooling comfort in every corner of your room. However, like with humans, it pays to clean them regularly for better airflow and performance. Let’s dig in and learn about how to clean Bionaire Tower Fan!

What Things To Do When Filters Are Dirty

If your Bionaire Tower fan filters are dirty, follow these simple steps to clean them. First, turn off the fan and unplug it from the wall. Then spray a mixture of vinegar and water onto the filters. Be sure to use enough water to cover the filters. Let the solution sit for a few minutes, and then remove the filters with a vacuum cleaner. Wash them with regular dishwashing soap and a hose. Dry them before re-inserting into the fan.

The Basic Steps

If your Bionaire Tower Fan is giving you a headache because of the dust and cobwebs it is creating, there are several steps you can take to clean it. The first step is to take the cover off. This will allow you to reach all of the nooks and crannies that need cleaning. Next, turn on the fan and use a dust pan to collect the dust and cobwebs that are being created. Once the fan is running, dump the collected dust and cobwebs out of it onto a cloth or paper towel. Finish off by putting the cover back on and turning off the fan.

The Advanced Steps

If you’re looking to clean your Bionaire Tower Fan, there are a few things you need to know. First, you’ll want to turn it off and unplug it. Next, remove the covers. There are three on the top and two on the bottom. Once they’re off, use a damp cloth to wipe down all of the surfaces. Make sure to get into the corners and anywhere that dust or debris may have settled. Finally, replace the covers and turn on your fan.

See also  How To Clean Bullet

How to Remove Smudges and Build-Up

If you have a Bionaire Tower Fan, you know that it can get quite dusty and smoky. In order to clean it properly, you’ll need to remove any build-up and smudges. Here are some tips on how to do this:

1. Wet your sponge and apply mild soap to it. Gently rub the surface of the fan while moving the sponge in circles.

2. Once the fan is clean, use a vacuum cleaner towelling attachment to remove all the dust and debris. Make sure to turn off the vacuum cleaner before touching the blades orwall plug.


To clean your Bionaire Tower Fan, remove the cover and screws on the bottom. Then take off the top of the unit. Pour a pitcher of water into the unit and turn it on to high. Use a screwdriver to remove the four screws from the front of the unit. Once those are removed, lift off the fan cover. Soak a cloth in water and wring it out. Wipe down all surfaces inside and outside of the fan. Replace the fan cover and screws.

Frequenty Asked Questions

How Often Should I Clean My Bionaire Fan?

Bionaire tower fans can be easily cleaned with a damp cloth, so you only need to clean it when necessary.

It depends on the frequency of air purification that your tower fan features.

How Do I Clean My Bionaire Tower Fan?

In order to clean your Bionaire Tower Fan, you will need to remove the access panel on the bottom. Next, detach the 4 screws and remove the tower fan from its base. Once you have done that, you can clean it with a rag and use water to clean the motors. After drying it off, place everything back together and enjoy the fresh airflow!

See also  How To Clean A Crystal Pipe

The first thing you will want to do is remove any dust or debris off the metal drive. Use a vacuum cleaner, brush, and/or compressed air can to remove the dust. Next, you’ll want to use the cleansing solution that came with your fan to wash the metal pieces clean. Make sure it has run for at least 60 seconds before moving on to the next step. After you have finished washing, give the metal pieces one last rinse in cold water. For steel, this would be colder than what it was originally as well.

How Do I Clean The Filters On A Bionaire Tower Fan?

With the push of a button, remove the filters and rinse in clean water. Then let them hang or lay flat to dry. When they are fully dry, screw the filters back on and re-assemble the tower fan.

Most of the time, you can find maintenance instructions with your Bionaire Tower Fan. Every type of fan has a different kind of filter that needs to be cleaned, so take a look at the manual. If not, here are some guidelines:

I Bought This Bionaire Tower Fan, How Do I Clean It?

If you have trouble removing dust or grime from the Bionaire Tower Fan, use a commercial cleaning product.

We recommend using distilled water for the easiest, most effective cleaning. Make sure that you put the disassembled fan in a container with ample room for all the parts and keep it there until you’re ready to reassemble. With distilled water, you can remove any residue left on the coconut shell by using a cotton swab. If necessary, use a piece of cloth dipped in distilled water to wipe away stubborn grime or dust particles.

See also  How To Clean A 1911 Kimber

How Often Should I Clean A Bionaire Tower Fan?

Cleaning a Bionaire tower fan will depend on how often you use it. In general, our fans clean easily using just water and soap. You can also use a Bionaire air purifier that cleans the air with natural zeolite technology.

Whether you have a Bionaire tower fan that is 3+ years old or a more recent one, clean it once a week. The only time you should not use this method of cleaning is if the fan has been making an odd noise. If your fan makes an unusual noise, then stop using it and contact customer service for assistance.

Also Check:

Leave a Comment